(A) Length - Bell housing to Output shaft 25.6" (650mm)
(B) Length - Bell housing to End case 24.4" (620mm)
(C) Length - Bell housing to Centre of Shifter 29.7" (755mm)
Width - Bell housing 15.5" (395mm)
Width - Gear Case (maximum) 8.5" (215mm)
(D) Height - Bell housing 14.1" (358mm)
(E) Height - Gear Case (maximum) 10.63" (270mm)
(F) Input Shaft OD 1.33" (34mm)
(A) Drive plate Diameter 252mm
(B) Drive plate surface area 50mm
OFFTOPIC!
Øvrig info:
Gear Ratio Km Per 1000rpm*
First 3.827 9.59
Second 2.360 15.55
Third 1.685 21.78
Fourth 1.312 27.97
Fifth 1.000 36.69
Sixth 0.793 46.27
Reverse 3.280 11.19
*3.266 Final Drive Ratio.
Lubricant Capacity 1.8 Litres
Oil Specification Toyota V160 Gearbox fluid (Getrag Certified), Castrol Transmax Z.
Dry Weight 51kg
Seals Part Number Price (AUD)
Front Outer Oil Seal 90080-31031 $27.50
Front Inner Oil Seal 90069-08001 $49.75
Rear Oil Seal 90080-31029 $49.75
Main Control Rod Oil Seal 90080-31032 $14.40
Speed Sensor O-Ring 96711-24030 $3.35
Synchronisers Diameter
First & Second gear (#1) 81mm
First & Second gear (#2) 76mm
First & Second gear (#3) 70mm
Third & Fourth gear (#1) 81mm
Third & Fourth gear (#2) 76mm
Fifth & Sixth gear (#1) 84mm
Reverse gear (#1) 72mm
Bearings
Input shaft Tapered roller bearing (Clutch housing)
- Sealed angular contact ball bearing (Pilot bearing)
Counter shaft Roller bearing (Clutch housing)
- Roller bearing (Intermediate housing)
- Roller bearing (Rear housing)
Output shaft Tapered roller bearing (Intermediate housing)
- Roller bearing (Rear housing)
Countershaft Gears Two row roller bearings
