til dere som sliter med sperre på 200km
Legg innLagt inn:05 feb 2012 22:51
en beskrivelse på hvordan du kobler en Speed Cut Defencer
RED: +12v Ign Power
BLACK: Power Ground
BROWN: Speed Signal to ECU
BlUE: Speed Signal to Sensor
in other words: you cut the pink speed sensor wire, tap the blue wire on the speed cut to the harness side, and tap the brown wire to the ecu side of the pink wire.... dont use the yellow and im sure you know how to wire the power and ground
her kan du kjøpe en
http://store.driftmotion.com/static/i-g ... 1jz2jz.php
RED: +12v Ign Power
BLACK: Power Ground
BROWN: Speed Signal to ECU
BlUE: Speed Signal to Sensor
in other words: you cut the pink speed sensor wire, tap the blue wire on the speed cut to the harness side, and tap the brown wire to the ecu side of the pink wire.... dont use the yellow and im sure you know how to wire the power and ground
her kan du kjøpe en
http://store.driftmotion.com/static/i-g ... 1jz2jz.php