Denne frista meg noe helt j*vlig ihvertfall! 
---------------------------------------------------------------------------------
Multi Function & Full Color Display"
Blitz offers boost control function (SBC i-D) and power meter function (POWER METER i-D) in one body . This is New Blitz SBC i-Color.
*Outstanding visibility on 65,000 full color & full dot LCD screen, which will be MUST item for the latest high performance cars.
*Multi-angle function enables the LCD display to be switched to 3 different directions (right, left or stand up mode), so the unit can be installed on any places. (Each button function on the unit is also altered automatically to suit each direction of the unit.)
*Sequential twin solenoid valve unit offers super quick and accurate response for boost control.
*Unit has the function of BLITZ POWER METER i-D, so it can measure engine power & torque and show them on the color screen.
*The color monitor can show 12 kinds of data, which are BOOST, TACHO, SPEED, POWER, TEMPERATURE (water/oil), OIL PRESSURE, FUEL PRESSURE, AIR/FUEL ratio and External Voltage Input 1-3 (needs optional external voltage input harness). Maximum 6 kinds of data can be shown on the screen at the same time. (Please note that temperature sensors, pressure sensors, and A/F unit are optional items.)
*Data logger function enables POWER, TORQUE, BOOST, A/F readings to be shown as graphical display on the color screen.
Features:
Opening Screen: choice of either turbo charger/ super charger /air cleaner and exhaust as a wall paper.
Dual Digital Meter: choice of 2 digital read outs to be shown on screen.
Six Fold Digital Meter: peak readings and bar graphs of six read outs shown.
Boost Setup: boost can be set to either manual or automatic.
Response Setup (boost setup): in automatic mode the boost can be set to normal, mild or slow.
Speed Controlled Boost Map: a map which controls boost depending on the speed of the car.
RPM Controlled Boost Map: a map which controls boost depending on engine revs.
Needle Boost Meter: Carbon faced digital boost guage that shows boost upto 2.0hkpa.
Needle Speed Meter: white faced speedo showing upto 260kph.
Displayed Warning: 2 source of your choice can be displayed on screen.
Needle Power Meter: white faced meter showing horsepower upto 500ps.
Needle Temp Meter: black faced meter showing temps. possiblity of showing water and oil temp although an extra sensor may be needed.
Needle A/F Meter: blue faced meter showing A/F readings. sensor required.
Chasis Dinamo Torque Graph: torque readings shown on a graph. values can be in kg.m or N.m
Needle Pressure Guague: blue faced guage to show various pressure readings. sensor needed.
Chasis Dinamo Power Graph: a power graph shown ps vs rpm. 3 records can be saved into memory.
Air/Fuel Graph: helpful when when changing engine settings, also has memory of upto 3 records.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Multi Function & Full Color Display"
Blitz offers boost control function (SBC i-D) and power meter function (POWER METER i-D) in one body . This is New Blitz SBC i-Color.
*Outstanding visibility on 65,000 full color & full dot LCD screen, which will be MUST item for the latest high performance cars.
*Multi-angle function enables the LCD display to be switched to 3 different directions (right, left or stand up mode), so the unit can be installed on any places. (Each button function on the unit is also altered automatically to suit each direction of the unit.)
*Sequential twin solenoid valve unit offers super quick and accurate response for boost control.
*Unit has the function of BLITZ POWER METER i-D, so it can measure engine power & torque and show them on the color screen.
*The color monitor can show 12 kinds of data, which are BOOST, TACHO, SPEED, POWER, TEMPERATURE (water/oil), OIL PRESSURE, FUEL PRESSURE, AIR/FUEL ratio and External Voltage Input 1-3 (needs optional external voltage input harness). Maximum 6 kinds of data can be shown on the screen at the same time. (Please note that temperature sensors, pressure sensors, and A/F unit are optional items.)
*Data logger function enables POWER, TORQUE, BOOST, A/F readings to be shown as graphical display on the color screen.
Features:
Opening Screen: choice of either turbo charger/ super charger /air cleaner and exhaust as a wall paper.
Dual Digital Meter: choice of 2 digital read outs to be shown on screen.
Six Fold Digital Meter: peak readings and bar graphs of six read outs shown.
Boost Setup: boost can be set to either manual or automatic.
Response Setup (boost setup): in automatic mode the boost can be set to normal, mild or slow.
Speed Controlled Boost Map: a map which controls boost depending on the speed of the car.
RPM Controlled Boost Map: a map which controls boost depending on engine revs.
Needle Boost Meter: Carbon faced digital boost guage that shows boost upto 2.0hkpa.
Needle Speed Meter: white faced speedo showing upto 260kph.
Displayed Warning: 2 source of your choice can be displayed on screen.
Needle Power Meter: white faced meter showing horsepower upto 500ps.
Needle Temp Meter: black faced meter showing temps. possiblity of showing water and oil temp although an extra sensor may be needed.
Needle A/F Meter: blue faced meter showing A/F readings. sensor required.
Chasis Dinamo Torque Graph: torque readings shown on a graph. values can be in kg.m or N.m
Needle Pressure Guague: blue faced guage to show various pressure readings. sensor needed.
Chasis Dinamo Power Graph: a power graph shown ps vs rpm. 3 records can be saved into memory.
Air/Fuel Graph: helpful when when changing engine settings, also has memory of upto 3 records.
---------------------------------------------------------------------------------
